The LED night light is used to indicate the product’s status during product setup or to report something that requires attention.
Blue Flashing
Indicates during initial setup:
The primary Wall Switch is waiting for the mobile device to complete pairing to both Wi-Fi and the iDevices Connected app.
Resolution:
Open the iDevices app and start the setup process:
Wall Switch Setup on iOS 11 and Later
Indicates during a 3-, 4-way setup:
Wall Switch is in Bluetooth pairing mode for connecting multiple Wall Switches in 3- or 4-way configurations.
Resolution:
Put any secondary Wall Switches into Bluetooth pairing mode to connect them.
Pairing Switches Together
Solid Blue
Indicates:
Wall Switch is connected to the Wi-Fi network but has not yet paired to the iDevices Connected app.
Resolution:
Open the app and retry the setup process:
Wall Switch Setup on iOS 11 and Later
Slow Blue Flashing
Indicates:
Bluetooth or Wi-Fi pairing mode has expired.
Resolution:
Reboot the Wall Switch by pressing the bottom right-hand button. Once the LED returns to solid purple, retry the setup process:
Wall Switch Setup on iOS 11 and Later
Green Flashing
Indicates during initial setup:
Once the Wall Switch connects to the Wi-Fi network, it will flash green for 1 second.
Indicates reconnection to the network:
If the Wall Switch has lost connection to the Wi-Fi network, the LED will flash green for 1 second to indicate when it has reconnected to the Wi-Fi network.
Resolution:
No action needed in either instance.
Orange Flashing
Indicates:
Wall Switch has lost the connection to the Wi-Fi network, or the Wi-Fi network has gone down.
Resolution:
Reconnect product to the Wi-Fi network:
Wi-Fi Network Not Found
Red Flashing
Indicates:
The product is being reset.
Resolution:
Once the LED returns to solid purple, the Wall Switch is ready to be set up again through the iDevices Connected app:
Wall Switch Setup on iOS 11 and Later
Purple Flashing
Indicates firmware being updated:
A firmware update is being installed onto the product.
Resolution:
Keep the app in the open until the firmware update is complete.
Indicates product being identified:
Wall Switch has received a request from the app to identify itself.
Resolution:
No action needed.
Solid Purple
Indicates:
Default LED night light color after pairing has completed.
Resolution:
Customize the nightlight to your preference.