1- Turn Light On
- Used also for 3-way, 4-way pairing
2- Turn Light Off
- Used also for connecting to Wi-Fi®
3- Status LED/Night Light
- Provides setup status and used as a night light during operation
4- Pull Out Tab
- Refer to this when prompted to enter your HomeKit setup code during the setup on a iOS device; also used to document the Wall Switch as the Primary or Secondary in a 3-way or 4-way configuration
5- Device Reboot
- Pressing this cycles power to the device
6- Pairing Setup Button or Device Reset
- Used to wirelessly pair multiple Wall Switches for 3- and 4-way configurations and for connecting to Wi-Fi
- DEVICE RESET: Press and hold for 10 seconds until LED blinks red. Note: Resetting the device will remove all pairings, schedules and scenes associated with this product.