1- Top Outlet ON/OFF or Device Reset
- Pressing this button will turn the individual outlet ON or OFF.
- DEVICE RESET: Press and hold for 10 seconds until LED blinks red. Note: Resetting the device will remove all pairings, schedules and scenes associated with this product.
- PAIRING MODE: Press and hold for 3 seconds until LED is solid blue.
2- Bottom Outlet ON/OFF or Device Reset
- Pressing this button will turn the individual outlet ON or OFF.
- DEVICE RESET: Press and hold for 10 seconds until LED blinks red. Note: Resetting the device will remove all pairings, schedules and scenes associated with this product.
- PAIRING MODE: Press and hold for 3 seconds until LED is solid blue.
3- Status LED/Night Light
- Provides setup status and used as a night light during operation.
4- Pull Out Tab
- Refer to this when prompted to enter your HomeKit™ code during the setup on an iOS device.
5- Device Reboot
- Pressing this cycles power to the entire unit.