The LED night light is used to indicate the product’s status during product setup or to report something that requires attention.
Blue Flashing |
Indicates during initial setup: The primary Dimmer Switch is waiting for the mobile device to complete pairing to both Wi-Fi and the iDevices Connected app. Resolution: Open the iDevices app and start the setup process: Dimmer Switch Setup on iOS 9 and 10 Dimmer Switch Setup on iOS 11 and 12 Dimmer Switch Setup on Android _________________________________________________ Indicates during a 3-, 4-way setup: Dimmer Switch is in Bluetooth pairing mode for connecting multiple Dimmer Switches in 3- or 4-way configurations. Resolution: Put any secondary Dimmer Switches into Bluetooth pairing mode to connect them. |
Solid Blue |
Indicates: Dimmer Switch is connected to the Wi-Fi network but has not yet paired to the iDevices Connected app. Resolution: Open the app and retry the setup process: Dimmer Switch Setup on iOS 9 and 10 |
Slow Blue Flashing |
Indicates: Bluetooth or Wi-Fi pairing mode has expired. Resolution: Reboot the Dimmer Switch by pressing the bottom right-hand button. Once the LED returns to solid purple, retry the setup process: Dimmer Switch Setup on iOS 9 and 10 |
Green Flashing |
Indicates during initial setup: Once the Dimmer Switch connects to the Wi-Fi network, it will flash green for 1 second. __________________________________________________ Indicates reconnection to the network: If the Dimmer Switch has lost connection to the Wi-Fi network, the LED will flash green for 1 second to indicate when it has reconnected to the Wi-Fi network. Resolution: No action needed in either instance. |
Orange Flashing |
Indicates: Dimmer Switch has lost the connection to the Wi-Fi network, or the Wi-Fi network has gone down. Resolution: Reconnect product to the Wi-Fi network: |
Red Flashing |
Indicates: Product is being reset. Resolution: Once the LED returns to solid purple, the Dimmer is ready to be set up again through the iDevices Connected app: Dimmer Switch Setup on iOS 9 and 10 |
Purple Flashing |
Indicates firmware being updated: A firmware update is being installed onto the product. Resolution: Keep app open until firmware update is complete. __________________________________________________ Indicates product being identified: Dimmer Switch has received a request from the app to identify itself. Resolution: No action needed. |
Solid Purple |
Indicates: Default LED night light color after pairing has completed. Resolution: Customize the nightlight to your preference. |