Pairing iShower2 to Your Mobile Devices

When the iShower2 is in Pairing Mode, it will display, “USER# PAIR.”

If it displays "USER# OPEN," this is an indication that the available user spot is open and you can press the "Play/Pause" button to 'Select' the USER-spot to start Pairing.

Follow these steps to pair for the first time:

1. Go to your mobile device or tablet settings and turn Bluetooth on.
2. Power on the iShower2.
3. Hold the Bluetooth/Pair button for 5 seconds on the iShower2 to enter Setup Mode. The screen will display, “USE1 OPEN.”
4. Press the Play/Pause button located on the front of your iShower2 to select, “USE1.” The iShower2 will try to pair for up to 30 seconds.
5. During these 30 seconds, select the iShower2 in your Bluetooth settings on your mobile device or tablet.
6. Once the connection has been made, the iShower2 logo will stop blinking and turn solid.
7. If you wait too long to select the iShower2 in Bluetooth settings, the pairing may fail and you must repeat the process again from step 3.